Stiga 4WD Uživatelský manuál Strana 1

STIGA PARK4WD92 M107 M107 M HD121 M110 Combi Pro125 Combi Pro8211-0543-03

37ENGLISHEN5 MAINTENANCE5.1 PreparationAll service and all maintenance must be carried out on a stationary machine with the engine switched off.Preven

38ENGLISHEN5.6.1 Separate bladesThe blades are replaceable. When replacing, both blades on the same blade bar must be replaced to avoid imbalance.Tigh

www.stiga.comGGP Sweden AB · Box 1006 · SE-573 28 TRANÅS

2125 Combi Pro110/125 Combi Pro121 M107 M HDABCBEF Torx T30Torx T30110/125 Combi ProGHI110/125 Combi Pro12110/125 Combi Pro121 M107 M HD110/125 Combi

392/107 MABDB10 mm13 mm13 mmJKL110/125 Combi ProM1113 107 M HD159 92/10712 92/107 M14 1610 92/107

492/107 M107 M HD121 M1/392/107 M121 M5 mm110/125 Combi Pro107 M HD1921 23 1720 22 24 18

5O110/125 Combi ProQ 9,8 NmP 24 Nm24 Nm92/107 M107 M HD121 M45 Nm110 Combi ProON107 M HD24 Nm125 Combi Pro2729 2528 30 26

33ENGLISHEN1 GENERALThis symbol indicates WARNING. Seri-ous personal injury and/or damage to property may result if the instructions are not followed

34ENGLISHEN2.3.3 Rear mountingThe cutting deck’s rear section is secured with the pins in fig. 13.2.4 Controls, 92/107 M2.4.1 Cutting height adjustmen

35ENGLISHEN3.2 Installation of 107 M HD, 121 M1. Place the cutting deck in position in front of the machine.2. Install the following components on bot

36ENGLISHEN3.5.2 Basic setting, 92/107 M, 121 MSee fig. 17 and perform basic setting of 92/107 M and 121 M as follows:1. Place the machine on a level